KNX IP Router
Product Manual
21
@2019 INTERRA
PM190205012AEN
4.5) Subline (KNX TP)
For Group Telegrams and Physical Telegrams the setting “transmit all” is intended only for testing
purposes. Please do not
use for normal operation.
Fig 9 : Subline (KNX TP) Tab Parameters
PARAMETER
DESCRIPTION
VALUES
Telegram routing
block : No telegrams are routed.
filter : Telegrams entered in the filter table are
routed.
route : All telegrams are routed.
configure : The following parameters must be set
manually.
Group: filter, Physical: block
Group and Physical: filter
Group: route, Physical: filter
Group and Physical: route
configure
Group telegrams :
Main group 0...13*¹
transmit all : Group telegrams (Main group 0...13)
are all routed.
block : Group telegrams (Main group 0...13) are all
blocked.
filter : Group telegrams (Main group 0...13) are
routed if entered in the filter table.
transmit all (not recommended)
block
filter
Group telegrams :
Main group 14...31*¹
transmit all : Group telegrams(Main group 14...31)
are all routed.
block : Group telegrams(Main group 14...31) are
all routed.
filter : Group telegrams (ana grup 14...31) are
routed if entered in the filter table.
transmit all (not recommended)
block
filter
Physical telegrams
transmit all : Physical telegrams are all routed.
block : Physical telegrams are all blocked.
filter : Depending on the physical address,
physical telegrams are routed.
transmit all (not recommended)
block
filter
