20
User Manual
with the ship's position. All navigation data is referred to this destination.
2.8
RANGE/BEARING FUNCTION
The Range/Bearing function allows to measure the distance and bearing between
two points on the Chart page.
It also finds a point on the map knowing the starting point and the distance and
bearing from the starting point. You enter manually the distance and bearing from
the origin and saves a Mark to the position found.
In both cases, the circle and the line are always removed once the function is
finished.
The starting point is the cursor or a ship's position (if you are in Home mode).
The ending point can be selected using the cursor or it can be calculated entering
the Range and Bearing values from the starting point.
Selecting Ending point with cursor
Move the cursor to the starting point or press [HOME] + [ENTER] +
"RANGE/BEARING" + [ENTER] + move the cursor to select your ending point
A window containing the distance and bearing values between the starting point
and the ending point is shown. Bearing Line and Variable Range Marker are dis-
played until you press [ENTER] to add a Mark at the ending point or press [CLEAR]
to exit.
Selecting Ending point by entering Range & Bearing
Move the cursor to the starting point or press [HOME] + [ENTER] + "RANGE/
BEARING" + [ENTER] + [ENTER] + enter distance and bearing values by
using the cursor
Pressing [ENTER] a Mark appears on the ending point.
2.9
MAN OVERBOARD (MOB)
If a person or object is lost overboard and you need to return to the location, use
the MOB (Man OverBoard) function.
To activate the MOB function, a valid GPS fix must be available.
Inserting MOB
[MOB] + [C
ONFIRM
]
If MOB is already placed:
[MOB] + [N
EW
] + [C
ONFIRM
]
removes the existing MOB and places a new one.
Once inserted, the system performs the following operations:
1. places the MOB icon at ship's position
2. stops navigation to an existing destination (if present)
3. sets the MOB as destination
Selecting Auto Info on MOB
Place the cursor on MOB symbol
An information window appears, showing the bearing and distance to the MOB
position.
Deleting MOB
[MOB] + "DELETE"
Summary of Contents for Chart Master 169CSI
