Interpack HSD2000-ET II MIRROR, Operations Manual & Parts List

Page: 38 / 67

UH179TW / UH679TW UDH179-02
38
P
REVENTIVE
M
AINTENANCE
UUU
Wipe Down Brush Replacement
This multi row brush assists in wiping down the top center seam of the case. While the red wipe down
rollers perform much of the wipe down, the wipe down brush enhances the wipe down as it can better
conform to the irregularities of the top of the case such as over fills, void fills and the “wash-board” effect
of thinner walled corrugated.
Over time, this brush can become distorted or worn and should be replaced.
Wipe Down Brush Replacement
1. Remove 2 M5 flathead
countersink screws (Item #1)
from the operator side panel
using a 3 mm hex key
2. Remove the brush (Item #2)
3. Install new brush with 2 M5
flathead countersink screws
as shown in
Figure 10-19
Figure 10-19