4
Connecting to ViewCommander-Edge for the First Time
Power
Power up the ViewCommander-Edge (the Edge) by first connecting the supplied 12
Volt power supply to the power connector in the back of the Edge unit. Then plug the
AC adapter into an AC outlet.
ViewCommander-Edge is configured to boot-up when power is supplied. This is useful
if the power should cycle while the Edge unit is deployed.
Windows Logon
To login to Windows, either connect a Monitor/Keyboard/Mouse to the Edge unit, or
connect the Edge unit to a network
Monitor, Keyboard, and Mouse
Simply connect a Monitor/Keyboard/Mouse to the Edge unit and log into it like a
desktop computer.
Network
Connect an Ethernet cable to the RJ45 jack in the back of the Edge unit to log
into it via Windows Remote Desktop. See Via Windows Remote Desktop (RDP)
on Page 11.
The Edge is shipped with a pre-configured IP address. Please see the
supplemental document that was shipped with your ViewCommander Edge for
specific network information and logon password information.
