Page 7
4. Install top angle and side retainers to cabinet
as
shown below.
5. Slide “I” section of window filler panel into side
retainer on the side of cabinet. Do both sides.
6.
Insert top and bottom legs of window
filler panel frame into channel in the top angle
and bottom rail. Do both sides.
7.
Insert washer head locking screws (2) in
to holes in top leg of filler panel frame. Do not
totally tighten. Screws will be tightened in later
steps.
Install the Cabinet into the Window
NOTE:
Handle air conditioner gently.
Be sure your air conditioner does not fall out
of the opening during installation or removal.
The place where the power cord exits the air
conditioner should be no more than 6.5 ft
(200 cm) from a grounded 3 prong outlet.
Do not block the louvers on the front panel.
Do not block the louvers on the outside of
the air conditioner.
Prepare the Window
Open window and mark center of the window sill.
Install the Cabinet
1. Center the air conditioner in window. Check
that lower rail of air conditioner is behind and
against back side of window sill.
Maintain a firm
hold on the air conditioner cabinet. Lower
window sash to hold cabinet in place.
2. Measure the distance between the right-hand
side of the cabinet and the inside of the window
channel.
Window Sill
Bottom Rail
