Intermec MobileLAN 21 Series, System Manual

Page: 51 / 275

Installing the 21XX
2-11
2
Mounting the 2102/2106 Using the Mounting Bracket
If you want to mount the 2102 or the 2106 on a wall, it ships with a mounting bracket
and four mounting screws. Install the 2102 or the 2106 in this mounting bracket on a
sturdy surface in accordance with local building codes. You need these tools and
materials:
•
Two #5 or M3 screws (appropriate for the surface on which you are mounting the
bracket)
•
Drill and drill bit appropriate for the mounting screws
•
Screwdriver
To mount the 2102/2106
1. Use the mounting bracket as a template to mark the location of the mounting holes
on the mounting surface.
2. Drill the mounting holes.
3. Position the bracket on the mounting surface.
Hook
(2 places)
Mounting
bracket
Slot
(2 places)
Back
panel
Screw
(2 places)
Clip
21XXT037.eps
4. Using the screws you provided, secure the bracket to the wall.
5. Fit the slots on the back of the 2102 or the 2106 over the hooks on the mounting
bracket.
6. Slide the 2102 or the 2106 up slightly, and then press the base of the access point
until it clicks into the clip at the bottom of the mounting bracket.