Intermec MobileLAN 21 Series, System Manual

Page: 147 / 275

Configuring the Radios
5-25
5
To configure the master radio (in the wired access point)
1. From the main menu, click the link corresponding to the radio that you are
configuring.
2. Click Wireless Bridging. The Wireless Bridging screen appears.
3. Click the down arrow on the right side of the Node Type field and choose Master
and then click Submit Changes. Your changes are saved and the Wireless Hops
parameter appears.
4. Click the down arrow on the right side of the Wireless Hops field and choose
Enabled and then click Submit Changes. Your changes are saved and the Hello
Period parameter appears.
5. Click the down arrow on the right side of the Hello Period field and choose a hello
period of 1, 2, or 3 seconds.
6. Click Submit Changes to save your changes. To activate your changes, from the
menu bar click Save/Discard Changes and then click Save Changes and Reboot. For
help, see “Saving Configuration Changes” in Chapter 1.
To configure the station radio (in the WAP)
1. From the main menu, click the link corresponding to the radio that you are
configuring.
2. Click Wireless Bridging. The Wireless Bridging screen appears.