Intermec MaxiScan 2500, User Manual

Page: 7 / 30

The various parts of the MaxiScan 2500 DP are:
Sleep mode switch If a sleep mode time-out has been programmed, the
scanner can be reactivated by pressing this switch.
The sleep
- mode feature can be programmed by
means of the menu labels in the Configuration Guide.
NOTE: The default value for the sleep mode time-out
is set to 30 minutes. When the scanner is in
sleep mode, the LED is intermittently flashing
red.
LED A red LED indicates that the scanner is ready to read
a bar code. A green LED indicates a good read.
Good read speaker The speaker sounds whenever data has been
correctly read. Both frequency and volume can be
adjusted by means of the menu labels from the
Configuration Guide.
Top deck The top deck, or horizontal scanner window can be
changed for a different type. Just sligthly lift the deck
at the front side and pull it towards you.
Product flow indicators The product flow indicators (two embossed arrows on
the stainless-steel top deck frame) indicate the
direction in which the products must be passed along
the scanner windows.
The MaxiScan 2500 DP 3
Scant9802_dl1_lp.qxd 03-11-2000 11:06 Pagina 3