Intermec MaxiScan 2500, User Manual

Page: 16 / 30

1.6 CONTROLLING THE SCANNER FROM THE POS SYSTEM
The MaxiScan 2500 DP can be controlled from the POS system via the RS232C
interface. Controlling is accomplished by transmitting the following single-byte
commands to the scanner. In the Intermec default setting the following
commands are available (more details upon request):
When the scanner is disabled, the scanner motor of the will remain switched-on
until the scanner goes into sleep mode.
12 The MaxiScan 2500 DP
ASCII code
0E Hex
0F Hex
05 Hex
function
enable (cancels disable)
disable
power-up re-initialization
byte is also called:
Shift Out or <Ctrl-N>
Shift In or <Ctrl-O>
ENQ or <Ctrl-E>
12 Hex
sleep
DC2 or <Ctrl-R>
14 Hex
wake (cancels sleep)
DC4 or <Ctrl-T>
POS system
+12V dc
- 12V dc
+ 5V dc
Maxiscan 2500 DP
Scanner control
Scant9802_dl1_lp.qxd 03-11-2000 11:06 Pagina 12