Intermec EasyLAN 10I2, User Manual

Page: 39 / 79

Configuring the EasyLAN 10i2 Adapter
2-13
2
Port Services Parameters Defined (continued)
Parameter Definition Values
Filter Select the data filter the service uses:
•
0, no filter: data passes unmodified
•
1, text substitution: default is CRLF for line feed (LF)
•
2, not used
•
3, converts normal text to PostScript
•
4, converts output data to PostScript Tagged Binary
0, 1, 2, 3, 4
Default = 0
Priority Enter the priority: a small number equals a high priority. 0 to 255
Default = 10
Control strings Select the data strings for the beginning of a job and end of a job. Predefined
Default = No string
Queue server Configure the EasyLAN 10i2 adapter to fetch print jobs directly from
the NetWare print queues. Checked, not checked
Default = checked
NDS tree Enter the name of the organizational tree and enter the context for your
NetWare network. To configure the EasyLAN 10i2 adapter for
NetWare Directory Services, check the Queue Server radio button and
enter an NDS tree name and context for the EasyLAN 10i2 adapter. To
disable NDS support, leave the NDS Tree field and the NDS Context
field blank. Any ASCII characters
Default = blank
NDS context Enter the organizational unit(s) that you configured for the
EasyLAN 10i2 adapter using NWAdmin or PCONSOLE. To disable
NDS support, leave the NDS Tree field and the NDS Context field
blank. Any ASCII characters
Default = blank
Bindery file servers or
service bindery file
servers Click either Configure Bindery File Servers or Configure Service
Bindery File Servers. For help, see the next procedure, “To configure
bindery file servers and service bindery file servers.”
Remote printer Check this radio button if you have a NetWare print server loaded on
the file server or workstation. Checked, not checked
Default = not checked
Printer number Enter the NPrinter number on your NetWare server. 0 to 255
Default = 0
Print server Enter the name of the NetWare print server. Any ASCII characters
Default = blank
Raw TCP port Enter a number for the TCP port to be used with this service. 1024 to 65535
Default = 9100
Bi-directional
communication Configure the service to send data back from the printer to the network.
Normally you should not need to change this. Checked, not checked
Default = checked
Queued (TCP)
communication Configure the EasyLAN 10i2 adapter to queue jobs sent to the raw TCP
port. If not configured, the EasyLAN 10i2 adapter rejects jobs if the
EasyLAN 10i2 adapter is currently busy with another job. Checked, not checked
Default = checked