Intermec EasyCoder 4420, User Manual

Page: 21 / 156

Getting Started
1-9
1
Printing the Hardware Configuration Test Label
You can print the hardware configuration test label to test the printer and make
sure it is operating correctly. The hardware configuration test label lists your
printer’s configuration. Use this label for reference when connecting the 4420 or
4440 printer to your system.
To print the hardware configuration test label
1. Turn off the printer.
2. Press and hold the Feed/Pause button while you turn the printer on. The
Alert and Empty/Pause LEDs blink during the printer self-test.
3. Release the Feed/Pause button when the media starts moving. The printer
feeds out one or two blank labels and then prints the hardware
configuration test label.
4. Turn the printer power off and then on again.
44XXU.010
4420 Hardware Configuration
: 128 kilobytes
: 517 kilobytes
: OKB
: 0
: 0
: 0
: 896
: 5.0
: 126
: none
: none
: none
: 066197
: 0.8
Memory Installed
Flash Storage
Image RAM
Flash SIMM
Mileage
Inches Processed
Inches Burned
Labels Cut
Printhead
Width
Dot Size
Burn Pot Setting
Hardware Options
I/O Option
Internal Option
External Option
Program
Version
Note: The hardware configuration label defines the above parameters. Individual
values vary between printers.