background image

Chapter 2 — Connecting and Configuring the CN4

CN4 Mobile Computer User’s Manual

51

To use Intermec Settings

1

On the CN4, tap 

Start

 > 

Settings

 > the 

System

 tab > 

Intermec 

Settings

.

2

Tap a menu bar. A new menu or a list of configurable items 
appears.

3

In a list of configurable items, choose or change options by 
entering data in the entry fields or checking the appropriate check 
box.

To restore the default settings to all items in the current menu, 
tap 

Menu

 > 

Restore Menu Defaults

. Tap 

Yes

 to clear the 

confirming message and restore menu defaults.

To restore all default settings, tap 

Menu

 > 

Restore All 

Defaults

. Tap 

Yes

 to clear the confirming message and restore 

all defaults, which may take a few minutes.

4

Tap 

Back

 or 

 to save your changes and go back to the previous 

screen.

Tap 

 to return to the main menu.

5

To close Intermec Settings, in the main menu tap 

ok

 or choose 

Menu

 > 

Exit

.

For more information on all parameters in Intermec Settings, see the 

Intermec Settings Command Reference Manual

.

Summary of Contents for CN4



















































































































































Reviews: