Intermec CN4, User Manual, Page: 70 / 146

Chapter 2 — Connecting and Configuring the CN4
58 CN4 Mobile Computer User’s Manual
Managing Network Connections With iConnect
After you configure 802.11 or Ethernet network settings, you can use
the iConnect utility to:
• check the network connection status with a ping test.
• change basic network parameters.
• change Funk security profile settings.
• turn the 802.11 radio, Ethernet, phone, or Bluetooth radio on and
off.
To turn a network connection on or off
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Enable and then choose a network connection from the
list. A check mark next to the connection type indicates that the
connection is enabled.
To configure or change wireless security profile settings
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Tools > Wireless Settings . The Profile Wizard appears.
3 Choose a profile from the Profile list and change settings as
needed. For more information, see
“Selecting a Funk Security
Profile” on page 61.
To configure or change wireless or Ethernet network settings
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Tools > Wireless IP Settings or Ethernet IP Settings . A
dialog box appears that shows the current settings for the wireless
or Ethernet network adapter.
3 Change settings as needed and click ok .
To check the connection status with a ping test
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Tools > Ping Test .