manualshive.com logo in svg

Intermec CN4, User Manual, Page: 30 / 146

Share
Download
Intermec CN4 User Manual Download Page 30

Chapter 1 — Using the CN4

18

CN4 Mobile Computer User’s Manual

Enabling the Vibrate Mode 

You can enable the vibrate mode when audio is difficult to hear, such 
as in a high noise environment. When enabled, the CN4 vibrates when 
the scanner performs a good read or when the phone receives a call.

To enable the vibrate feature

1

Tap the Volume icon (

) at the top of the screen.

2

Tap 

Vibrate

.

Using the Screen

The CN4 has a 3.5" diagonal, 240x320 pixel (QVGA) transflective 
TFT-LCD 64K color display.

•

The Status bar displays the Start flag, connectivity icons, the 
Volume icon, and the time and next appointment.

•

The Today screen displays shortcuts to some of the applications 
installed on the CN4 and important information for the day.

The Command bar displays the onscreen keyboard icon, Windows 
Mobile 6.1 links, and icons to any applications that are running, but 
are hidden from view.

Note

: The Volume icon in the Navigation bar changes to look like a 

vibrating CN4 (

) when the Vibrate feature is enabled.

Summary of Contents for CN4



















































































































































Reviews:

No comments