9189 RF Gateway
1-21
1
About 9189 Commands
This section describes the 9189 software commands.
Note:
The Code 39 bar code labels in this chapter show an asterisk (*) at the beginning
and end of the human-readable interpretation to represent the start and stop codes. If
you are creating your own Code 39 bar code labels, you may not have to include the
asterisks because your bar code utility may automatically supply them as the start/stop
code.
Entering Configuration Mode
Purpose:
Puts the gateway in Configuration mode. Must be the first characters in a batch
configuration string.
Format:
..$+
Exiting Configuration Mode
Purpose:
Exits Configuration mode and triggers a soft reset to update all parameters.
Any data following this command will be ignored.
Format:
$-
Default Configuration
Purpose:
Resets all parameters to their factory-set values and invokes diagnostic
procedures.
Note:
All data buffered in memory will be lost when the Default Configuration
command is executed.
Format:
..$+.+
Scan:
*..$+.+*
*..$+.+*
Summary of Contents for 9189
