Intermec 9189, User Manual

Page: 15 / 52

9189 RF Gateway
1-7
1
To install the battery pack
•
Position the pack as shown in this figure and tighten the screw.
Battery
Pack
9189U.002
Connecting the External Power Supply
An external power supply can be attached to the connector on the side of the
gateway, as shown in the figure on the next page. These Intermec power
supplies are appropriate for use with the gateway:
•
120 VAC, 50/60 Hz (Intermec P/N 042684)
•
100 VAC, 50/60 Hz (Intermec P/N 043230)
•
220 VAC, 50/60 Hz (Intermec P/N 045652)
Caution
The internal battery pack must be installed in the gateway when using an
external power supply. Failure to comply may result in equipment damage.
Conseil
Le jeu de piles interne doit être installé dans la gateway lors de l'utilisation
d'une source de courant externe. Si ce n'est pas le cas, vous risquez
d'endommager l'équipement.