Intermec 6950 User Manual Download Page 2 | Manualshive

Page: 2 / 144

background image

"

NOTICE

The information contained herein is proprietary and is provided solely for the

purpose of allowing customers to operate and service Intermec manufactured

equipment and is not to be released, reproduced, or used for any other purpose

without written permission of Intermec.

Disclaimer of Warranties. The sample source code included in this document is

presented for reference only. The code does not necessarily represent complete,

tested programs. The code is provided

AS IS WITH ALL FAULTS."

ALL

WARRANTIES ARE EXPRESSLY DISCLAIMED, INCLUDING THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

We welcome your comments concerning this publication. Although every effort has

been made to keep it free of errors, some may occur. When reporting a specific

problem, please describe it briefly and include the book title and part number, as

well as the paragraph or figure number and the page number.

Send your comments to:

Intermec Technologies Corporation

Publications Department

550 Second Street SE

Cedar Rapids, IA 52401

INTERMEC and NORAND are registered trademarks and ENTERPRISE

WIRELESS LAN, UAP, and UNIVERSAL ACCESS POINT are trademarks of

Intermec Technologies Corporation.



1996 Intermec Technologies Corporation. All rights reserved.

Acknowledgments

AS/400

and

IBM

are registered trademarks of International Business Machines

Corporation.

DEC, VAX,

and

VT220

are registered trademarks of Digital Equipment

Corporation.

UNIX

is a registered trademark of UNIX System Laboratories, Inc.

B

CAUTION:

Intermec Technologies Corporation suggests you buy cables from us to
connect with other devices. Our cables are safe, meet FCC rules, and suit
our products. Other cables may not be tested. They may cause problems
from electrostatic discharge or induced energy. Our warranties do not cover
loss, injury, or damage from other cables.

«
1
2
3
4
...
»

Summary of Contents for 6950

















































































































































Reviews:

No comments

Related manuals for 6950

Brand: IBM Pages: 180

Power 720 Express 8202-E4B

Brand: IBM Pages: 64

Brand: IBM Pages: 148

Brand: IBM Pages: 36

Brand: IBM Pages: 834

Brand: Quantum Pages: 14

SuperServer 5013C-MT

Brand: Supero Pages: 98

Brand: Patton electronics Pages: 121

SuperWorkstation 740A-T

Brand: Supermicro Pages: 138

FusionServer 5288 V6

Brand: xFusion Digital Technologies Pages: 131

Brand: Cable-Tronix Pages: 33

Brand: IBM Pages: 100

Brand: RackSolutions Pages: 8

SuperServer 1019D-FRN8TP

Brand: Supermicro Pages: 126

Brand: Protogate Pages: 30

xSeries 440 8687

Brand: IBM Pages: 80

xSeries 230 6RY

Brand: IBM Pages: 194

Brand: Infrant Technologies Pages: 98

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands