Intermec 6804DM, Technical Reference Manual

Page: 55 / 146

SECTION 4 Operation
Intermec Portable Printers Technical Reference Manual 4-7
ton for four seconds. If the battery is good, you will see the
abbreviation for the word “GOOD” next to the Battery volt-
age print out.
This printer has a built in low battery detector. When the
printer’s battery voltage is low, the printer will beep three
times, indicating a Low Battery Warning. This will only
happen however, if the printer is awake.
This printer recharges in approximately one hour.
WARNING: WARNING: Use only the batteries specified for the printer.
Using non- approved batteries will void your warranty.
French Canadian: Utiliser uniquement les batteries spécifiées
pour l’imprimante. L’utilisation de batteries non approuvées
annulera votre garantie.
6806 Printer
To determine the current charge on the battery pack, you
can print out a self test by pressing and holding the red
self--test button on the side of the printer for four seconds.
If the battery is good, you will see the word “GOOD” next to
the battery voltage print out.
This printer has a built in low battery detector. When your
printer’s battery voltage is low, the printer will beep three
times, indicating a Low Battery Warning.
The 6806 Printer recharges in approximately four hours.
6804 Series
To determine the current charge on the battery pack, print
out a self test by pressing and holding the red self--test but-
ton for four seconds. If the battery is good, you will see the
abbreviation for the word “GOOD” next to the Battery volt-
age print out.
This series of printers has a built in low battery detector.
When the printer’s battery voltage is low, the printer will
beep three times, indicating a Low Battery Warning. This
will only happen however, if the printer is awake.