Intermec 6804DM, Technical Reference Manual

Page: 51 / 146

SECTION 4 Operation
Intermec Portable Printers Technical Reference Manual 4-3
Linerless Labels
If you are using linerless paper, it is recommend that you
use the manual paper loading method.
Automatic Paper Loading
6805a and 6806 Printers
1. Press the red self test button to wake the printer.
2. With the loose, clean edge of the paper coming from
the bottom of the roll, insert the edge of the paper be-
tween the roller and the platen.
3. If the printer is on, it will feed the paper automatical-
ly. If you have allowed the printer to fall into sleep
mode, press the red self test button.
4. Insert the plastic paper rod through the center of the
paper roll.
5. Place the narrow end of the rod into the small hole on
the side of the paper cavity.
6. Snap the wider end into the cutout on the opposite
side of the paper cavity.
7. Turn the paper knob clockwise to tighten the paper
slack in the cavity.
8. Replace the end boot and tear off extra paper.
6804 and 6808 Series of Printers
1. With the loose, clean edge of the paper coming from
the bottom of the roll, insert the edge of the paper be-
tween the roller and the platen.
2. Press the red self test button to wake the printer.
3. Push the button again while the printer is awake
causes the mechanism to feed about 1” of paper.
4. Insert the paper into the paper well with it resting on
the paper rod clips.