9. The
SET ON/OFF EVENTS
and
OFF@
icons are displayed. Press ENTER/NEXT if this fixed off event is not needed, go to step 17
10. Press – to eliminate this event, or press + to keep this event for the selected day.
11. Press DAY to move to the next day of the week; (repeat step 10).
12. When all the days are set, press ENTER NEXT to save.
13. If an event is not set, the time display will show - - - -.
14. Press DAY. The screen displays 12:00 am and the days of the week.
15. Press + or - to set the time for the fixed event to turn off the timer.
If the desired days for this event
are
Then
MON-SUN
Press ENTER/NEXT to save. Go to step 17.
MON-FRI
Press DAY once and then press ENTER/NEXT to save. Go to step 17.
SAT-SUN
Press DAY twice and then press ENTER/NEXT to save. Go to step 17.
SET EACH DAY INDIVIDUALLY
On the display, the day of the week
being set is flashing.
Press DAY three times and the MON icon should flash.
Go to step 14.
16. Press – to eliminate this event or press + to keep this event for the selected day.
17. Press DAY to move to the next day of the week (repeat step 14).
18. When all the days are set, press ENTER/NEXT to save.
19. The Event Number increments and the
SET DATE
and
ON@
icons are displayed.
If
Then
Another fixed event needs to be set
Return to step 3.
All the events are set
Press MODE to save and exit. The procedure is complete.
Enabling Override Function
1. Pressing the ON/OFF Button will turn load ON for one hour.
NOTE:
Press and hold the ON/OFF button for 3 seconds to turn load OFF
Enabling Vacation Mode
1. Press MODE button to start Vacation Mode.
2. Press MODE button to stop Vacation Mode.
NOTE:
The timers display will read OFF and not power water heater when activated.
Deleting (Clearing) an Event
User programmed events can be deleted from the time switch. If you need to delete an event, follow this procedure:
1. If necessary, press and hold MODE until
SET DATE
and
ON@
icons appear on the display
2. Press ENTER/NEXT as necessary to scroll through the scheduled events until you see the event you want to delete.
3. Press + and –
at the same time
until the display shows - - - -. This indicates the event is erased.
4. If necessary, press ENTER/NEXT to advance through the other configured events.
5. Press MODE to save the changes and exit.