39
Programming — Use with Z-Wave Home Control Devices
5.
When a message appears on the controller instructing you to set the
device, adjust the device level as needed.
NOTE:
Device levels enable users to con
fi
gure which devices turn ON/
OFF when a Scene is activated.
6.
Press the scene number to save the device to the scene. The controller
displays
SUCCESSFUL
to indicate the device is included in the scene.
7.
Repeat steps 4 through 6 to add another device to a Scene or repeat steps 2 through 6 to add
devices to other Scenes.
8.
When all the devices are added to the Scenes, press
ENTER
to scroll to the main screen.
&RQÀJXULQJ6FHQH1DPHVLQ&RQWUROOHU
Con
fi
guring Scene names enables users to better describe the function of each scene. Follow this
procedure to con
fi
gure names for each Scene in the controller:
1.
Press
ENTER
to scroll to the
SCENE ACTIVATION
screen.
2.
Press
P/S
and
ENTER
simultaneously to access
LEARN MODE
.
3.
Press
to scroll to the
Z-WAVE OPTIONS 32-32P
screen.
4.
Press the Scene number button for the Scene you want to name. The
Scene number appears with the
fi
rst letter of the name highlighted.
5.
Press
or
to scroll to the desired number or letter and press
P/S
to scroll to the next character in the name.
6.
Repeat step 5 as necessary to complete the desired name and press
ENTER
to save the name and return to the
Z-WAVE OPTIONS
screen.
7.
Repeat steps 4 to 6 as necessary to con
fi
gure a name for each Scene.
&RQWUROOLQJ=:DYH'HYLFHV
Once you have included Z-Wave devices in the network and have added them to various Scenes,
follow this procedure to control Z-Wave devices:
1.
Press
ENTER
to scroll to the
SCENE ACTIVATION
screen.
2.
Press the corresponding button for the scene you want to activate. The scene name appears.
3.
Take one of these actions:
If you want to...
Then...
Activate the scene (ON)
Press
to activate the scene
De-activate the scene (OFF)
Press
to deactivate the scene
NOTE:
After you activate or deactivate the scene, the controller screen displays
WORKING
followed by
SUCCESSFUL
when it completes the command, and then returns to the scene
screen.
4.
Repeat steps 2 and 3 to activate another scene.
5.
When all the desired scenes are activated, press
ENTER
to return to the PE653 screen.
