www.intermatic.com
28
MultiWave Control System Programming and User Guide
Chapter 5:
Programming — Freeze Option Screen
The freeze options protect the pool and/or spa from cold temperatures by turning the heater on.
Procedures include:
¸
Con
fi
guring the Freeze Temperature
¸
De
fi
ning the Circuits for the Freeze Condition
¸
Determining Speed During Freeze Condition (with variable
speed pump)
¸
Enabling/Disabling Heater During Freeze Condition (with water
probe)
¸
De
fi
ning Actuator Pool/Spa Cycle (with actuator control or expansion module)
&RQÀJXULQJWKH)UHH]H7HPSHUDWXUH
NOTE:
This procedure applies only to pool/spa systems with the air sensor installed.
Follow this procedure to de
fi
ne the freeze temperature initiation value — the temperature at
which the heater turns on.
1.
Press
P/S
and
ENTER
simultaneously to access
LEARN MODE
.
2.
Press
to scroll to the
FREEZE OPTION
screen.
3.
Press
1
to select
TEMP
.
4.
Press
or
to choose the temperature (between 40°F and 44°F).
5.
Press
ENTER
to save.
'HÀQLQJWKH&LUFXLWVIRUWKH)UHH]H&RQGLWLRQ
Follow this procedure to de
fi
ne the circuits that activate when the freeze temperature is reached.
1.
Press
P/S
and
ENTER
simultaneously to access
LEARN MODE
.
2.
Press
to scroll to the
FREEZE OPTION
screen.
3.
Press
2
to select
PE653 CIRS
.
4.
Press the applicable buttons (
1
through
5
) on the controller to activate
the desired circuits.
NOTE:
If you have a 1-speed pump, press 1 to circulate water. If you
have a 2-speed pump, press 1 for high speed or 2 for low speed.
5.
After the circuits are selected, press
ENTER
to save.
