![background image](http://html.mh-extra.com/html/interlogix/zerowire-zw-6400/zerowire-zw-6400_reference-manual_2076761016.webp)
16
P/N 466-5227
• REVA • ISS 26AUG15
ZeroWire Reference Guide
©2015 United Technologies Corporation
1.1 Install the Battery
1.2 Connect Power Lead to panel
Connect power lead from power supply to the back of the ZeroWire. The connector is keyed
and only fits one way.
1.3 Install ZeroWire Panel
ZeroWire may be mounted on a wall (recommended) or on a table.
For table mount information please
Install the bracket on a wall by using the supplied screws. Make sure the power lead can
reach the ZeroWire when plugged in to a power source.
Note:
Holes in the wall supplying Ethernet, power, antenna or I/O connector
must
be in the
shaded area to ensure the unit mounts flat on the wall; See the drawing on the next page.
Connect battery pack
lead to connector on the
left inside battery
compartment.
Connectors are keyed.
Replace battery cover
and screw.
Remove battery cover
with a small
screwdriver.