Interlogix xgen, Installation & Programming Manual

Page: 59 / 123

xGen Installation & Programming Guide 57
Programming Instructions for System Options
Goal
Program System Options including time and date, tamper, siren, timers, and
service settings.
Pre-conditions
If you want time and date to be automatically updated then check internet time
server is enabled under Communicator – IP Config.
If you want to allow xGen to send diagnostic emails then check email is set up
correctly under Communicator – Email and xGen is connected to a network.
Note: Ensure you set the correct time zone here.
Menu Overview
Instructions
1. Open System
2. Select the right Time Zone using the Hours and minutes offset
3. If you wish to update the time and date
2. System
a) System Clock
b) System and Siren
c) Timers
d) Maintenance and Test