EN 10
User Manual
Model Specifications
UVM-4200
VESA standard
: 200 x
200 mm and 400 x 200 mm
(7.87 x 7.87 in. and 15.75 x
7.87 in.)
Screw thread
: M5 screw
Length
: 10.0 mm
Troubleshooting
Symptom Check
Picture is jittery
Adjust
Clock
to set the screen
position and adjust Clock
value carefully until a noise is
no longer displayed.
No picture
Check if the power switch and
computer power switch are in
the On position
Check if the signal cable is
correctly connected to the
video card.
Check if the pins of D sub-
connector are not bent.
Check if the computer is in the
power- saving mode.
POWER LED is
not lit
Check if power switch is in the
On position.
Check if the power cord is
correctly connected.
Image is
Check if the signal cable is
Symptom Check
unstable
suitable for the video card.
Image is not
centered, too
small or too
large
Adjust
Clock
or
H&V Center
to get the proper image.
Picture bounces
or a wave
pattern is
present in the
picture
Keep devices that may cause
electrical interference away
from the monitor.
See the FCC information at
the front cover of the manual.
Picture is blurred
Adjust
Contrast
and
Brightness.
Low sound
Adjust the volume on the OSD
menu.
Adjust the volume of the
sound card in the computer.
VIDEO screen
cannot be seen
Check if PICTURE mode has
been set.
Check if the video terminal is
properly connected.
No video
Check if the video cable is
correctly connected to the
computer and set to
Functions
on the OSD
picture menu.
Poor color in the
video
Adjust the
Color
or
Tint
values on the OSD Picture
menu.
Grainy picture in
the video
Adjust the
Sharpness
on the
OSD Picture menu.
Specifications
UVM-2600 / UVM-3200 models
Items
UVM-2600 model
UVM-3200 model
Panel
Screen size
26 in. (66 cm)
32 in. (81.3 cm)
Pixel pitch
0.4215 x 0.4215 mm
0.36375 x 0.36375 mm
View angle (H/V)
178°/178°
178°/178°
Contrast ratio
3000:1 (typ)
5000:1 (typ)
Response time
6.5 ms (G-to-G)
6.5 ms (G-to-G)
Brightness
450 cd/m² (typ)
450 cd/m² (typ)
Recommended
resolution
1366 x 768 @ 60 Hz
1920 x 1080 @ 60 Hz
