Recording
Record any event-triggered video such as motion
detection video with the doorbell camera.
Alarm notification
Launch the UltraSync app to see alarm messages.
Add camera to the network via WPS
A WPS-enabled wireless router is required to add a
camera using the WPS function.
1. Press the WPS button on the router.
2. Within 120 seconds of pressing the WPS button
on the router, press the WPS button on the
camera for approximately five seconds. See
“Camera description” on page 5 and 6 for WPS
button and LED locations.
3. The blue LED on the camera flashes rapidly to
indicate that it has started the WPS process. A
white LED illuminates when the camera has
joined the wireless network.
TruVision Device Manager
The TruVision
®
Device Manager is standalone
software that can discover TruVision IP devices on a
network.
In addition to finding device IP addresses, the
camera password can be activated, IP settings can
be changed, and camera firmware can be updated
using Device Manager.
14
P/N 466-2950-EN • REV B • ISS 07MAY18 © 2018 United Technologies Corporation. All rights reserved.
