P/N 1073418-EN
• REV
A
• ISS
12FEB18
3 / 4
To mount a wedge camera to TVD-
PPB pendant mount with a TVD-CB2
cup base:
1.
Screw the pendant mounting plate
onto the
p
endant mount pipe and
tighten
with the locking screw, as
shown.
2.
Pull the camera cables through the
pendant mount
. A
ttach the mount
to the ceiling with expansion
anchors
that are included with the
p
endant mount
.
3.
Using four screws
that are included
with the w
edge
camera, attach the
w
edge a
dapter
p
late
to the cup
base.
Screw the cup base onto the
pendant mount and tighten
with the
locking screw.
4.
Loosen the screws on the wedge
bubble assembly using the
T
orx
wrench
that is supplied with the
camera
,
and remove the enclosure
.
5.
Using two
screws
that are supplied
with the wedge camera, attach the
camera base to the wedge adapter
plate
.
6.
Re
-
attach the camera enclosure to
the camera
.
Legal and regulatory
information
Copyright
© 2018 United Technologies
Corporation. All rights reserved.
Interlogix is part of UTC Climate,
Controls & Security, a unit of United
Technologies Corporation.
Trademarks and
patents
The trade names used in this
document may be trademarks or
registered trademarks of the
manufacturers or vendors of the
respective products.