2 / 4
P/N 1073418-EN
• REV
A
• ISS
12FEB18
•
Adapter plate mounting screws
To mount a wedge camera to a TVD-
SNB wall mount with a TVD-CB2 cup
base:
1.
Pull the camera cables through the
wall mount
tube
. A
ttach the
swan
neck wall mount to the wall using
the expansion anchors
that are
provided
with the
s
wan neck mount
.
2.
Using
the four
A
screws, attach
w
edge a
dapter
p
late
to the cup
base.
3.
Screw the cup base onto the swan
neck wall mount
and tighten
with
the locking screw.
4.
Loosen the screws on the wedge
bubble assembly using the
T
orx
wrench that is supplied with the
camera
,
and remove the enclosure
.
5.
Connect
the cables to the wedge
camera.
Using two screws
that are
supplied with the w
edge
camera
,
attach the camera base to the
wedge adapter plate
.
6.
Re
-
attach the wedge bubble
assembly
to the camera.
