4
/ 5
P/N 1073093-EN
• REV
A
• ISS 30SEP15
4
.
Mount the
outdoor angled
back box
to the
TVW
-
2G
-
AD
adaptor plate
using the supplied hardware.
5.
Loosen the screws with
the
tamper
-
resistant hex wrench
(supplied) to remove the camera cover.
6. Connect the cables, conceal the cables and connectors
inside the back box
and mount the camera base
to the
outdoor a
ngled back box
.
7.
Re
-atta
ch the dome cover to the camera.
To mount the wedge camera on an indoor angled back
box:
1.
Drill the holes for the mounting hardware i
n the
mounting
surface
using
the supplied drill template.
2.
Mount
the in
door back box
to the
mounting surface
by
using the supplied hardware.
3.
Loosen the screws with
the
tamper
-
resistant hex wrench
(supplied) to remove the camera
cover.
4
. Connect the cables, conceal the cables and connectors
inside the back box
,
and mount the camera base to
the
indoor a
ngled back box
.
5.
Re
-
attach the dome cover to the camera.
To mount the wedge camera on a 2-gang box:
1.
I
nstall the 2-
gang box
(
separately
purchased)
in the wall
according to the local applicable codes and regulations
2. Attach the
TVW
-
2G
-
AD
adapter to a pre-installed 2-gang
box on wall
.
