Refer to the installation guides provided with the TVP
-
WBS
and TVP-PAS mounting kits for instructions on mounting the
stainless steel PTZ camera to the wall or ceiling.
After completing the PTZ camera installation, you can remove
the safety lanyard handle. See the image below.
Mounting the junction box
To mount the PTZ camera junction box:
1.
Drill mounting holes in the mounting surface according to
the supplied drill template. Insert the four screw Bs in the
mounting surface, and partially tighten down the four
mounting screws.
328 mm (12.91 in.)
113
mm
(4
.45
in.)
2.
Remove the cover of the junction box and align the four
slotted mounting holes on the junction box with the
mounting hardware. Secure the junction box to the
mounting surface.
Installation Guide
13