TruVision Series 5 IP Camera Configuration Manual
45
7. Click
Save
to save changes.
Unattended Baggage Detection
Unattended baggage detection function detects the objects left over in the pre-defined
region such as the baggage, purse, dangerous materials, etc. A series of actions can
be taken when the alarm is triggered.
Figure 20: Unattended baggage detection window
To define unattended baggage detection:
1. From the menu toolbar, click
Configuration
>
Smart Event
>
Unattended
Baggage Detection.
2. Select the
Enable Unattended Baggage Detection
check box to enable the
function.
3. Click
Draw Area
, and then draw a rectangle on the image as the defense region.
When you draw the rectangle, all lines should connect end-to-end to each other. Up
to four areas are supported. Click
Clear
to clear the areas you have drawn. The
defense region parameters can be set up separately.
Note
: The area can only be quadrilateral.
4. Choose the region to be configured.
Threshold:
the threshold for the time of the objects left over in the region. If you set
the value as 10, alarm is triggered after the object is left and stay in the region for
10s. The range is from 5 to 20 s.
5. Click
Edit
to set the arming schedule for the alarm input. See “Motion detection
alarms” on page 30 for more information.
6. Specify the linkage method when an event occurs. Check one or more response
methods for the system when an intrusion detection alarm is triggered.