![background image](http://html1.mh-extra.com/html/interlogix/truvision-5-series/truvision-5-series_configuration-manual_2077153034.webp)
32
TruVision Series 5 IP Camera Configuration Manual
To set up motion detection in normal mode:
1. From the menu toolbar, click
Configuration
>
Basic Event
>
Motion Detection
.
2. Select the
Enable Motion Detection
check box. Select the
Enable Dynamic
Analysis for Motion
check box if you want to see real-time motion events.
Note:
If you do not want the detected object to be marked with the green frame,
select
Disable
from Configuration > Local Configuration > Live View Parameters >
Rules.
3. Select
Normal
mode from the drop-down list.
4. Click
Draw Area
. Click and drag the mouse on the live video image to draw an area
sensitive to motion detection.
Note:
You can draw up to 8 motion detection areas on the same image.
5. Click
Stop Drawing
to finish drawing. Click
Clear All
to delete all areas marked and
restart drawing.
6. Move the
Sensitivity
slider to set the sensitivity of the detection. All areas will have
the same sensitivity level.
7. Click
Edit
to edit the arming schedule, editable only if Enable Motion Detection. See
the picture below for the editing interface of the arming schedule.
8. Choose the day and click
to set the detailed time period. You can copy the
schedule to other days.
9. Click
OK
to save changes.
10. Specify the
linkage method
when an event occurs. Check one or more response
methods for the system when a motion detection alarm is triggered.