46
TruVision Series 5 IP Camera Configuration Manual
Notify Alarm Recipient
Send an exception or alarm signal to remote management
software when an event occurs.
Send Email
Send an email to a specified address when there is a motion
detection alarm.
Note
: You must configure email settings before enabling this
option. See “To set up the email parameters” on page 17 for
further information. If you want to send the event snapshot
together with the email, check the Attached Snapshot option.
Upload Snapshot
Capture the image when an alarm is triggered and upload the
picture to NAS or FTP server.
Note
: To upload the snapshot to NAS, you must first configure
the NAS settings. See “NAS settings” on page 49 for further
information.
To upload the snapshot to an FTP, you must first configure the
FTP settings. See “To define the FTP parameters” on page 17
for further information. Enable the
Upload Type
option.
To upload the snapshot to FTP and NAS when motion
detection or an alarm input is triggered, you must also enable
Enable Event-triggered Snapshot
under the snapshot
parameters. See “Snapshot parameters” on page 48 for further
information.
Trigger Channel
Trigger the recording to start in the camera.
Trigger Alarm Output
Trigger external alarm outputs when an event occurs. Check
“Select All” or each individual alarm output.
Note
: This option is only supported by cameras that support
alarm output.
7. Click
Save
to save changes.
Object Removal Detection
Object removal detection function detects the objects removed from the pre-defined
region, such as exhibits on display, and a series of actions can be taken when the
alarm is triggered.
Figure 20: Object removal detection window