P/N 466-2461
• REV H • 29JUL13
1
Simon XT/XTi
GSM Module V4 Installation
Instructions
Content
Contact information#1
Introduction#1
Compatibility#1
Account creation#1
Installation#2
Power up#3
GSM phone test (module registration)#3
Control panel settings that change automatically with
HSPA 3G module#3
Troubleshooting: Module Status Information#3
Troubleshooting: LEDs#4
LED patterns for the various module states (modes)#6
Improving wireless signal strength#6
Interactive menus#6
Walking customer through new user setup on the web#9
Specifications#10
Regulatory information#10
Contact information
or
© 2013 UTC Fire & Security Americas Corporation, Inc.
Interlogix is part of UTC Climate Controls & Security, a unit of
United Technologies Corporation. All rights reserved.
For additional information and support on Alarm.com products
and services, please visit
Alarm.com technical support at 1-866-834-0470.
Copyright © 2013 Alarm.com. All rights reserved.
Introduction
The HSPA 3G module (part numbers 600-1048-XT-ZX-TM ,
600-1048-XT-ZX-AT AND 600-1048-XT-ZX-RG) for Simon XT
and XTi enables
wireless reporting of all alarms and other
system events from the
Simon XT and XTi control panels using
an all-digital, HSPA wireless
(cellular) network. The module
can be used as
the primary communication path for all alarm
signaling, or as a backup to a
telephone line connection to the
central monitoring station. The
wireless alarm signaling and
routing service is operated by
Alarm.com.
The V4 module also
features integrated support for Alarm.com’s emPower
TM
solution with built-in Z-Wave capabilities.
The module interfaces with the Simon XT and XTi panel
boards, fits into a special compartment inside the
panel, and is
powered by the control panel and panel battery.
Compatibility
The V4 module with firmware version 151 & up is compatible
with Simon XT and XTi panels. Older versions of the
Alarm.com module, including versions of the V4 module with
previous firmware versions are not compatible with the Simon
XTi.
Account creation
Before installing an Alarm.com HSPA 3G Module in a Simon
XT or XTi system, a new customer account needs to be
created with Alarm.com. We recommend creating the account
at least 24 hours in advance of installation to ensure that the
radio is activated prior to installation.
To activate an account go to www.alarm.com/dealer and login.
Under the
“Customers” heading at the top left of the page click
on “Create New Customer”. You will need the following
customer information to create the account:
•
Customer Name
•
Customer Address
•
Customer Phone Number
•
Customer E-mail
•
Preferred login name for the customer
•
Alarm.com Radio Serial Number
At the end of the account creation process you will be able to
print a Welcome Letter for the customer that has their login
information and temporary password for the Alarm.com
website.
