Interlogix NXG-4 Installation And Programming Manual Download Page 88

Page: 88 / 170

xGen Lite Installation and Programming Guide

3. Select the Z-Wave Door Lock in the drop-down list. If the lock does not

appear, follow instructions on Adding Z-Wave Devices.

4. Wait for the

“Building User List – Please Wait” message to be replaced with

“Ready”.

5. The default will have

“All Users” pre-selected. You may select an individual

user instead.

6. Optional and recommended, click

“Remove PIN(s) from Lock”. This ensures

any extra PIN codes are removed from the lock and only the PIN codes from
the panel can operate the lock. Once completed it will show

“Removed All

Users

”.

7. Click

“Send PIN(s) to Lock”.

PIN codes will be sent to Z-Wave door lock one at a time. Once completed it
will show

“Sent All Users”.

8. Test PIN codes on door lock and verify only the codes you

want can

operate

the lock.

9. Refer to door lock manual to remove or change installer / master codes from

door lock.

Summary of Contents for NXG-4











































































































































































Search results

Summary of Contents for NXG-4

Reviews:

Interlogix NXG-4, Installation And Programming Manual, Page: 88 / 170

Search results

Summary of Contents for NXG-4

Reviews: