Interlogix GE-DS-242-PoE, User Manual

Page: 95 / 218

Chapter 4: Console Management
GE-DS-242-PoE Managed Ethernet Switch User Manual 91
State Activity
Having set up the LACP aggregator on the tab of Aggregator Setting, you can
configure the state activity for the members of the LACP trunk group. You can
tick or cancel the checkbox beside the state label. When you remove the tick
mark of the port and click the
Apply
button, the port state activity will change to
Passive.
Figure 4-46: State Activity of Switch 1
This page includes the following fields:
OBJECT DESCRIPTION
Active
The port automatically sends LACP protocol packets.
Passive
The port does not automatically send LACP protocol packets, and
responds only if it receives LACP protocol packets from the opposite
device.