Interlogix GE-DS-242-PoE, User Manual

Page: 54 / 218

Chapter 4: Web-Based Management
50 GE-DS-242-PoE Managed Ethernet Switch User Manual
OBJECT DESCRIPTION
Rate Control
(Unit: 128KBbps)
Port-1 ~ Port-24, supports by-port ingress and egress rate control.
For example, assume port 1 is 10Mbps, users can set its effective
egress rate at 1Mbps and ingress rate at 500Kbps. Device will
perform flow control or backpressure to confine the ingress rate to
meet the specified rate.

Ingress: Type the port effective ingress rate.
The valid range is 0 ~ 8000. The unit is 128K.
0: disable rate control.
1 ~ 8000: valid rate value

Egress: Type the port effective egress rate.
The valid range is 0 ~ 8000. The unit is 128K.
0: disable rate control.
1 ~8000: valid rate value.
Security
A port in security mode will be "locked" without permission of
address learning. Only the incoming packets with SMAC already
existing in the address table can be forwarded normally.
User can disable the port from learning any new MAC addresses,
then use the static MAC addresses screen to define a list of MAC
addresses that can use the secure port. Enter the settings, then
click Apply button to change on this page.
BSF
User can disable/Enable port broadcast storm filtering option by
port.
The filter mode and filter packets type can be select in Switch
Setting > Misc Config page.
Jumbo Frame
User can disable/Enable port jumbo frame option by port. When port
jumbo frame is enable, the port forward jumbo frame packet.