Interlogix GE-DS-242-PoE, User Manual

Page: 143 / 218

Chapter 6: Command Line Interface
GE-DS-242-PoE Managed Ethernet Switch User Manual 139
port jumboframe
Description:
Set port jumbo frame. When port jumbo frame is enable, the port forward jumbo
frame packet
Syntax:
port jumboframe
<enable | disable> [<
port-list
>]
Parameters:
<
port-list
> specifies the ports to be set. If not entered, all ports are set.
show port status
Description:
Show port status, including port State, Link, Trunking, VLAN, Negotiation, Speed,
Duplex, Flow control, Rate control ,Priority, Security, BSF control.
Switch(config)#
show port status
----------------------------------------------------------------------
Port 1 Information
----------------------------------------------------------------------
State: on
Link: down
Trunking: none
VLAN: DEFAULT
Priority: disable
Security: off
----------------------------------------------------------------------
Port 2 Information
----------------------------------------------------------------------
State: on
Link: down
Trunking: none
VLAN: DEFAULT
Priority: disable
Security: off
----------------------------------------------------------------------