Interlogix GE-DS-242-PoE, User Manual

Page: 17 / 218

Chapter 2: Installation
GE-DS-242-PoE Managed Ethernet Switch User Manual 13
Reset button
At the left of front panel, the Reset button is designed to reboot the Managed
Switch without turning the power off. The following table summarizes the Reset
button functions:
Reset Button Pressed and
Released Function
About 1~3 seconds Reboots the Managed Switch
Until the PWR LED goes out
Resets the Managed Switch to Factory Default
configuration. The Managed Switch will then reboot and
load the default settings as below:

Default Password: admin

Default IP address: 192.168.0.100

Subnet mask: 255.255.255.0

Default Gateway: 192.168.0.254
LED Indicators
The front panels LEDs indicate instant status of port links, data activity and
system power. They help monitor the system and aid in troubleshooting when
necessary. The front panel LEDs are shown in Figure 2-2.
Figure 2-2: GE-DS-242-PoE LED panel