Interlogix FW5.1, Installation Manual

Page: 5 / 6

P/N 1073029-EN • REV A • ISS 03JUN15 5 / 6
Change the administrator password once the set -up is
complete. Only authorized users should be able to modify
camera settings.
To access the camera online:
1. In the web browser enter the camera’s IP address (default
is 1 92.168.1.70). The Login dialog box appears.
2. Enter your user name and password.
Default user name: admin
Default password: 1234
Click Login . The web browser screen appears in live
mode.
3. Click the Configuration tab on the top of the screen and
select the parameter to change .
Figure 4: Example of a configuration window
Table 1: Overview of the Configuration panel
Configuration folders Description
System Defines device basic information
including SN and the current
firmware version, time settings, and
maintenance parameters .
Network
Defines the network parameters
required to access the camera over
the internet.
Video/Audio Defines recording parameters .
PTZ Defines the PTZ parameters.
Image Defines the image parameters, OSD
settings , overlay text , and privacy
mask .
Security Defines who can use the camera,
their passwords and access
privileges, RTSP authentication, IP
address filter , and telnet access.
Events
Defines motion detection, tamper -
proof, alarm input/output, exception ,
and snapshot configuration .
Storage Defines recording schedule, storage
management and NAS
configuration.
.
Specifications
Electrical
Voltage input 24 VAC, PoE+ (IEEE 802.3at)
Power
consumption
Pendant housing:
PoE : Max. 25 W
24 VAC: Max. 65 W
Flush housing: Max. 2 5 W
Surface housing: Max. 2 5 W
Miscellaneous
Operating
temperature
Pendant housing: PoE+ for -30 to 65 °C
24 VAC: -40 to +65 °C
Flush housing: -10 to +50 ° C
(14 ° F to 122 ° F)
Surface housing: -10 to +50 ° C
(14 to 122 ° F)
Dimensions Pendant housing: Ø 220 × 266 mm
Flush housing: Ø 206 × 251 mm
Surface housing: Ø 180 × 240 mm
Weight Pendant housing: 3,5 kg
Flush housing: 3 kg
Surface housing: 2,5 kg
Environmental
rating
Pendant housing: IP66
Flush housing: IP54
Surface housing: IP54
Pin definitions
There are eight wires on a standard UTP/STP cable and each
wire is color - coded. The following shows the pin allocation and
color of straight and crossover cable connection:
Figure 5: Straight-through cable
1 White/Orange White/Orange 1
2 Orange Orange 2
3 White -Green White -Green 3
4 Blue Blue 4
5 White/Blue White/Blue 5
6 Green Green 6
7 White/Brown White/Brown 7
8 Brown Brown 8
Figure 6: Cross-over cable
1 White/Orange White/Orange 1
2 Orange Orange 2
3 White -Green White -Green 3
4 Blue Blue 4
5 White/Blue White/Blue 5
6 Green Green 6
7 White/Brown White/Brown 7
8 Brown Brown 8
Please make sure your connected cables have the same pin
assignment and color as above before deploying the cables in
your network.