![background image](http://html.mh-extra.com/html/interlogix/concord-4/concord-4_user-manual_2077289047.webp)
Concord 4 User Manual
45
The display shows
ENTER CODE
.
2. Enter your access code.
The display shows all the partitions that will be armed.
3. Press # to arm all displayed partitions, or press the number of any partitions
you don’t want armed (the partition numbers disappear from the display), and
then
press #.
To disarm multiple partitions at the same time from a touchpad:
1. Press 1 on any touchpad assigned to one of the partitions you want to disarm.
The display shows
ENTER CODE
.
2. Enter you access code.
The display shows all the partitions that will be disarmed.
3. Press # to disarm all displayed partitions, or press the number of any
partitions you don’t want disarmed (the partition numbers disappear from the
display), and then press #.
4. If desired, press 4 (no delay) or 6 (latchkey) to activate those features.
Use the following guidelines to arm/disarm multiple partitions from alphanumeric
and fixed display touchpads:
• A partition cannot be armed or disarmed if it is being controlled by another
source at that time. For example, if you are at a Partition 1 touchpad and are
attempting to arm Partitions 1 and 2, a Partition 2 touchpad in use at that
same time prevents arming of that partition.
• Any arming modifiers (4 – no delay, 6 – latchkey) selected at arming apply to
all associated partitions. However, silent arming (5 – silent) only affects the
partition from which you are arming. All other partitions sound exit beeps to
notify occupants that those partitions are arming.
• When arming multiple partitions, any conditions that prevent arming (open,
trouble, active alarm, etc.) are identified on system touchpad displays with the
affected partition number flashing. (If arming from a keychain touchpad, the
condition is displayed on touchpad displays in the affected partition, while
other touchpad displays show
PROTEST
). The normal protest/auto force arm
sequence follows, or you can press * to cancel the arming request.
• When disarming multiple partitions, any partitions in alarm have the affected
partition number flashing on system touchpad displays. Pressing # cancels all
alarms in the associated partitions. Alarm memory information is then
displayed for all canceled alarms.