© 2018 UTC Fire & Security Americas Corporation, Inc.
1 / 7
P/N 466-5438 • REV A • ISS 16OCT18
Simon 5" TouchScreen Version 2
Installation Guide
Description
The Simon 5” TouchScreen model 60-924-RF-TS5-2 features
a color 5-inch LCD screen with a graphical user interface
designed to control basic functionality of the Simon XT (v1.3 or
later), Simon XTi, and Simon XTi-5 control panels. Up to four
touch screens can be learned (programmed) into each Simon
XT, XTi, or XTi-5 panel. Note the TouchScreen is optimized to
work with the latest features in the Simon XTi-5 Version 2.
The touch screen provides a convenient option for the
following system operations:
x
Arm the system (doors, windows, and motion sensors).
x
Disarm the system.
x
Activate a panic alarm to call the central monitoring station
in a nonmedical emergency.
x
Check
system
status.
x
Turn system controlled lights on or off (depending on your
system configuration).
x
Lock and unlock system-controlled door locks (depending
on your system configuration).
x
Open and close system-controlled garage doors
(depending on your system configuration; XTi-5 Version 2
Panel only).
x
Hear voice feedback of the status of the Simon XT, XTi,
XTi-5, or XTi-5 V2 control panel.
x
Customize color and fonts matching the interactive service
on the mobile phone (Xti-5 Panel Version 2 only).
Safety Information
IMPORTANT SAFETY INFORMATION; READ ENCLOSED
WARNINGS AND SAFETY INFORMATION.
WARNING: CHOKING HAZARD.
The product accessory bag
contains items that could be choking hazards. Please
keep away from small children.
WARNING:
Disconnect panel power before servicing.
CAUTION:
Use static electricity precautions when handling
electronic components.
CAUTION:
Only the cable provided with the device can be used to
provide power.
Installation Guidelines
Use the following guidelines when adding this touch screen to
the Simon XT, XTi, XTi-5, or XTi-5 V2 system:
x
Power up and learn the touch screen into the panel and
verify its operation before mounting it to its permanent wall
or desktop location.
x
The touch screen should be the last sensor programmed
(learned) into the panel. Doing this allows the panel’s
programming configuration to be properly transferred to
the touch screen.
x
Program (learn) the touch screen into the panel as a
sensor Using group types 00, 01, 04, 05, 06, or 07.
x
The touch screen will work best if mounted greater than
3 ft. (approximately 1 m) from the Simon panel.
x
Avoid mounting the touch screen directly behind the
Simon XT, XTi, XTi-5 or XTi-5 V2 panel on the opposite
side of the wall.
x
Always do a sensor test before attaching the touch screen
to the wall.
