18
u
A graphics resolution and color depth has been selected that exceeds installed display
memory. Restart the system in VGA mode, then open Display in the Control Panel to
reinstall and configure the display driver as described in the video display adapter
documentation delivered with the system.
After you’ve configured the video display, restart the system and select the non-VGA version of
the appropriate operating system to use the new configuration.
Configuring Mouse Operation
Your system was delivered with a three-button mouse whose driver software was installed
before shipment. See the operating system documentation and Help for more information on
configuring the operation of a mouse.
Configuring Networking
If you purchased a network adapter with your system, it was installed before shipment. You
must configure the operating system to use the network adapter. To do this, you may have to
install network driver software and network adapter control software, and then change
operating system settings to enable networking. Before you configure networking, make sure
that the system has an installed network adapter, and that the network adapter is connected to a
network.
To configure networking, open Network in the Control Panel. Follow the instructions in the
dialogs to set up the system to use a network. Be sure to set up the appropriate network
protocols, such as TCP/IP, for the network to which the system is connected.
On a system running Windows NT, after installing network protocols, reinstall the appropriate
Windows NT Service Pack software as recommended by Microsoft.
See the documentation for the installed network adapter for detailed configuration instructions.
See the operating system documentation and Help for information on setting up the system to
use a network.