37
CAUTION
Be sure to select Shut Down from the Start menu, and then select the shutdown
option, before powering off the system with the Power button. Powering off the
system simply by using the Power button can cause data loss and/or file corruption.
See the following table for details on using the Power button.
If system is
Press Power button
To
Off (amber LED on)
Momentarily (< 1 sec)
Start the system
Shut down (Restart button visible)
Momentarily (< 1 sec)
Power down the system
After you complete Setup and start the system for the first time, you can start and stop the system
as needed.
To start the operating system:
1.
Turn on power to the system. The boot menu displays.
2.
Select Windows NT and then press enter.
To log on to the operating system:
1.
If the logon dialog does not display, press
CTRL
+
ALT
+
DELETE
to display it.
2.
Type a username and password into the appropriate boxes.
3.
If appropriate, type a domain name.
4.
Select OK or press
ENTER
.
To log off, restart, shut down, or power down the system:
1.
Go to Start/Shut Down.
2.
To log off the operating system, click Close all programs and log in as a different user.
To restart the system, click Restart the computer.
To shut down the system, click Shut down the computer.
3.
Click Yes to activate the selected shutdown option.
4.
To power down the system with the Restart button visible, press and release the Power button.
After shutting down and turning off power to the system, wait at least 30 seconds before restarting
the system. This allows the power supply to stabilize and the disk drives to stop spinning.
Summary of Contents for StudioZ GT
