Intergraph StudioZ GT, Setup Manual, Page: 36 / 88

26
Configuring the Video Display
The first time you start the system, your monitor displays a resolution of 1024 x 768. For the
system to use the installed graphics controller at other display resolutions, you must configure the
video display driver as described in this section.
Open Display in the Control Panel to configure the video display driver. Use the Settings tab in
the Display Properties dialog box to change the color depth, desktop size, font size, refresh rate,
and display type. To determine which graphics controller is installed on your system, click the
Display Type button.
See the graphics controller documentation (delivered with the system) and
README
.
TXT
files
(delivered with the video display driver) for detailed configuration instructions. For information
on using the Display Properties or Display Settings dialog, see the operating system documentation
and Help.
Resetting the Video Display Resolution
If the monitor connected to your system does not support a resolution of 1024 x 768, you can reset
the video display to another resolution.
To reset the video display resolution:
1. Restart the system.
2. At the boot screen, select the VGA mode option, and then log on to Windows NT.
3. Right-click the desktop and select Properties. The Display Properties dialog displays.
4. Select a resolution appropriate for your system’s monitor.
5. Click Test to test the new video mode, and then click OK.
6. Restart the system.
Changing the Default Video Display Driver
After configuring the video display and restarting the system, you should configure the system to
use the Intergraph video display driver by default.
To change the default video display driver:
1. Open System in the Windows NT Control Panel. The System dialog displays.
2. Under Operating System, select the Startup list; then select the appropriate non-VGA option
from the displayed list.
3. Click OK.