10
Customize the Screen Tracking Area
Customizing defines a small rectangle on the digitizer’s surface to represent the entire screen tracking
area. The digitizer ships preconfigured with the screen tracking area defined as the entire active
tracking area. This requires a user to move the two-handed controller across the entire length of the
digitizer’s active tracking area to move the on-screen pointer from one corner of the screen to the other.
NOTE
The active tracking area is the section of the digitizer in which the two-handed controller operates. It is
identified on the digitizer surface as a rectangular outline on the mylar cover.
To select on-screen icons with less effort than using the two-handed controller, you can customize the
screen tracking area.
To customize the screen tracking area:
1. From the Windows NT Start menu, select Programs/Altek/Wintab Control Panel.
2. Double click the Customization icon.
3. Clear the Whole Tablet check box.
4. Place a data point in the grey rectangle of the Tracking Area menu.
5. Place a data point on the lower left corner of the desired tracking area in the digitizer active
tracking area.
6. Place a data point on the upper right corner of the desired tracking area in the digitizer active
tracking area.
7. Select OK to complete the operation.
Summary of Contents for ImageStation Z and use
Page 1: ...ImageStation Z Installation and Use August 1997 DHA023320 ...
Page 4: ......
Page 24: ...20 ...
