Serial I/O Device
Connections:
The 9825
indicator comes standard with one USB port.
USB Port Connections:
The 9825 indicator comes standard with a MINI-USB port that can be connected to a PC.
This USB port is designed for data communication and firmware upgrades.
Analog Output
Connections:
U
se
the JP1 pin header on the internal analog option board to configure the analog output
for current output (4-20mA, 0-24mA) or voltage output (0-10V, 0-5V). Please note that voltage and
current outputs cannot be used at the same time.
We suggest using a PLC or PC to monitor the analog
output calibration.
Configure the voltage or current output as follows. Output type is selected in the Analog Out Setup
menu, under the Output Type submenu.
Voltage output:
Select either 0-5V or 0-10V. Use the & Analog - terminals.
Current output:
Select either 0-24mA or 4-20mA. Use the & Analog - terminals.
Interface Inc. www.interfaceforce.com
4
9825 Installation & User Manual
