Intercoax ECP-2808RM User Manual Download Page 4

Product Overview — 4

1.  Product Overview

1.1.  Introduction

The All-New Intercoax ECP/EUP-2808RM/2816RM Series is 19” rack mountable managed Long Distance Ethernet 
and PoE over Coax/UTP Receiving Switches.
ECP/EUP-2808RM/2816RM series are capable of connecting more than 8/16 ECP Transmitters even with  
Daisy-Chain connection and also support PoE powered devices such as IP cameras. 
Data rates up to 1Gbps are achievable, making these devices the ideal choice in new or legacy installations where 
existing Coax/UTP cable is re-deployed as part of an upgrade from Analog to IP cameras.
ECP/EUP-2808RM series have built-in 320 Watt power supply and ECP/EUP-2816RM series have built-in 640 Watt 
power supply (*Dual power supply of 320W + 320W for power sharing and redundancy)  
PoE up to 60W per port is available.
Intercoax' "ECP Manager", accessible via Web GUI, allows management of all IEEE 1901-HPAV standard devices 
connected, and multiple ECP/EUP-2808RM/2816RM devices remotely.

1.2.  Features

•  Ethernet & PoE transmission over Coax / UTP cable
•  Complies to IEEE1901-HPAV standard 
•  Extended transmission distance up to 2,400m
•  PoE/ PoE+/ Extra PoE up to 60W (PoE++) per B-Linx port & T-Linx port
•  Total management software, "ECP Manager", via Web GUI
•  Friendly Graphic User Interface with EasyView 
•  Remote Join & Unjoin, Change joining password 
•  Remote power reset by each port
•  Real-time monitoring of power consumption for each port
•  Multicast Setting with IGMP Query & Report Generator
•  SNMP ready
•  VLAN ready
•  Port Locking for extra secured network connectivity
• 

Alarm LED & buzzer and notification on ECP Manager 

•  Scheduled event reporting and alert reporting to designative users
• 

Back up & Restore of configuration

•  Auto Power Short Protection
•  B-Linx & T-Linx Smart Device Detection for safe power transmission 
•  320W (8 port) / 640W (16 port) Built-in Power Supply
•  Built-in crosstalk canceling technology
• 

Support multiple configuration (Daisy Chain, Star, Ring, Etc.) on each port

•  Gigabit SFP and Copper uplink port
•  19-inch(1U) rack mountable design

1.3.  Package Contents 

ECP-2816RM 

(ECP-2808RM / EUP-2808RM / EUP-2816RM)

Bracket

Quick Installation 

Guide

AC Power code

Summary of Contents for ECP-2808RM























Reviews: