interco SKIPPY 62500-1, Operating Instructions Manual

Page: 39 / 56

SETTINGS / OPERATION
39
En
glis
h
7. Settings / Operation
Every interco product is customized to the individual
needs of the user and configured accordingly� To do
justice to all possible product designs, the list of op-
tions and accessories as well as their descriptions is
therefore somewhat more extensive�
Therefore please bear in mind that this Section may
also describe components that possibly do not exist
on your product�
7 . 1 . Basic configuration
Tool
As standard, the SKIPPY
®
is adjusted with an Allen
wrench WS 4 � This tool can be used to perform all ad-
justments to the SKIPPY
®
�
Adjusting the seat shell
All settings on the SKIPPY
®
can be made while the user
sits in it� It must be ensured that this is only done if the
user is secured by a second person!
To do this, set the SKIPPY
®
to the widest seat width, the
shortest seat depth and the shortest back height� After
the user has been placed in the SKIPPY
®
, the adduc-
tion guides are pushed against the user via a ratchet�
The seat depth adjustment panels and the back rest
extension are pulled out�
Important!
Retighten all screws again when
adjustment has been completed!
Make sure there is enough space (approx�
2 cm) in the back of the knees!
7 . 1 . 1 . Seating system
Seat width adjustment
The seat width of the SKIPPY
®
can be adjusted by
3 � 5 cm on each side via a ratchet� To do this, loosen
the screw at the front in the middle (Fig� 1 ) and the two
screws at the back on each side (Fig� 2 )�

Loosen the screw in the middle of the front

Fold the cover of the back rest to the side

Loosen the screws

Adjusting the seat width

Tighten the screw in the middle of the front

Tighten screws on the back rest

Replace the cover
Adjusting the seat depth
The seat depth of the SKIPPY
®
can be adjusted by 7 cm�
This is done by loosening the screw on the outside of
the adduction guide on each side (Fig� 3 )�

Fold the cover of the adduction guide to the side

Loosen the screw

Set seat depth

Tighten the screw

Replace the cover of the adduction guide
Abduction/windswept deformity
The abduction or windswept deformity of the SKIPPY
®
is adjusted by (Fig� 4 ):

loosening the screw in the middle of the front

adjusting the abduction/windswept deformity

tightening the screw
Fig 2
Fig 3
Fig 1
Fig 4