background image

15

o

 Coil Roofing Nailer

Drives Coil Roofing Nails (¾" to 1¾" / 19 to 45mm)

Model No. CRN45-15

Item No. 65510

9

Interchange Brands  

Operator’s Manual

32 . 

DISCONNECT THE AIR SUPPLY AND EMPTY THE MAGAZINE WHEN THE 

NAILER IS NOT IN USE. NEVER LEAVE A NAILER UNATTENDED WITH 

THE HOSE ATTACHED. 

Always disconnect the air supply from the nailer and empty the magazine when 

operation has been completed or suspended, when unattended, moving to a 

different work area, adjusting, disassembling, or repairing the nailer, and when 

clearing a jammed fastener .

33 . 

DISCONNECT AIR HOSE FROM NAILER WHEN:

 

„

Doing maintenance and inspection

 

„

Loading fasteners

 

„

Clearing a jam

 

„

It is not in use

 

„

Leaving work area

 

„

Moving it to another location

 

„

Handing it to another person

34 . 

MAINTAIN NAILER WITH CARE. 

Keep the nailer clean and lubricated for better and safer performance .

35 . 

USE ONLY AUTHORIZED OR RECOMMENDED PARTS, ACCESSORIES OR 

FASTENERS. 

Unauthorized parts, accessories or fasteners may void your warranty and can 

lead to tool malfunction and resulting injuries . Only authorized service personnel 

should repair the nailer .

36 . 

NEVER MODIFY OR ALTER A NAILER. 

Doing so may cause it to malfunction and personal injuries may result . The 

warranty is no longer valid when a tool is modified or altered .

37 . 

BE CAREFUL WHEN CLEANING TOOL WITH A BLOW GUN.
Do not touch the trigger, point the air outlet at a person, touch the safety/push 

lever, or set it to pushed up status .

38 . 

STORE NAILER PROPERLY. 

When not in use, the nailer should be stored in a dry place . Keep out of reach of 

children and lock the storage area .

Employer’s Responsibilities

1 . 

Ensure that this manual is available to operators and personnel performing 

maintenance .

2 . 

Ensure that nailers are used only when operators and others in work area are 

wearing 

EYE PROTECTION .

3 . 

Keep nailer in safe working order .

4 . 

Maintain nailer properly .

5 . 

Ensure that the nailers that require repair are not used before the repair is 

completed .

Summary of Contents for CRN45-15





















Reviews: